Chain actuator VEGA is available in both a 24V DC and a 230V AC version. This version has a fixed, non-adjustable stroke of 300mm. and a maximum push/pull force of 300N. Applicable to windows and vents for natural ventilation. The 24 Volt DC version complies with EN12101-2 and is therefore also suit..
The TWIN-VEGA is a 24V DC chain actuator with a double chain. It has a fixed, non-adjustable stroke of 300mm. and, because of the double chain, a maximum push/pull force of 600N. Applicable to wide windows and vents for natural ventilation. The actuator complies with EN12101-2 and is therefore also ..
24 Volt DC Chain actuator, type VEGA BMSline, with a maximum stroke of 300mm. which is programmable. The maximum push/pull force is 300N.
Suitable on windows and vents in (N-)SHEV installations and for daily ventilation purposes. Because of the very silent operation and compact die-cast aluminium h..
24 Volt DC Linear actuator with a maximum stroke of 180 or 300 mm. The maximum pull / push force is 650 N.
This simple, but extremely efficient, actuator is ideal for operating louvre systems, but can of course also be used for skylights and windows for natural ventilation.
The slim aluminum h..
Connecting cable 5-wire complete with mounted plug on 1 side. This cable is used to connect the NANO-SYNCHRO chain actuator to the controller board.Standard length 1.5 mtr. Other lengths are available on request.Outer jacket color: blackTested for N-SHEV use according to DIN EN 12101-2Attention: Thi..
Connecting cable 5-wire complete with mounted plug on 2 sides. This cable is used to connect NANO-SYNCHRO chain actuator together.Standard length 1.0 mtr. Other lengths are available on request.Outer jacket color: blackTested for NSHEV use according to DIN EN 12101-2Attention: This cable includes a ..
The VEGA-RF and VEGA-RF+RAIN actuators are supplied as standard complete with this remote control. You can order this separate 2-channel remote control as an extension or as a spare.Equipped with 2 push buttons (open / closed) and LED.To make the VEGA RF chain motor stop halfway through the stroke, ..
Rainsensor RS for automatically closing automated windows as soon as it starts to rain. Can be directly connected to VEGA RF-RAIN chain actuators, but also to the C-SV She(v) control panels. A heating element prevents dew formation on the surface. Particulary suitable for roof windows and sloping to..
Thermostat TH-C16i is used as an internal temperature-dependent
automatic release for ventilation purposes in SHE and ventilation
systems. This thermostat is a two-position controller and switches with a
change-over contact at the set threshold. The continuous signal is
returned and
evalua..
With weather control unit WCU-230 it is possible to control automated windows with 230V AC motors depending on the weather. The motor(s) are connected directly to the WCU-230, so you don't need a complete control unit. The WCU-230 is equipped with the following connections:1x Input for manual ..
Control unit for the entrapment protection of windows that are automated with 24 V DC actuators.
The EPS-24 is equipped with the following connections:1x input for manual switch
1x input for external 24V DC control unit (with polarity inversion)
1x Input for 24V DC power supply
1x in..
Control unit for the entrapment protection of windows that are automated with 230V AC actuators.
The EPS-230 is equipped with the following connections:1x input for manual switch
1x Input for 230V AC power supply
1x input for motion sensor (e.g. T3768T652)
1x Actuator output 230V..