HANDLE SPINDLE DRIVE ZV-ELIMATIC

The ZV-ELIMATIC is an electromechanical drive that replaces the window handle. By applying the handle-spindle-drive, it is possible to keep using the mechanical fittings/lockingpoints in a window that has to be automated. Ideal for automated burglar-resistant windows and windows with extra locking points for extra wind-and watertightness. The only difference is that the window handle is replaced by the ZV-ELIMATIC.
Can be combined with all electrical actuators from Simon-PROtec that have an F contact or a potential-free contact in the CLOSED position.

The direction of rotation (CCW / CW) and the rotation angle (90/180 degrees) can be set by DIP switches.
Can be used on both inward and outward-opening windows, bottom-hung and top hung windows with fittings that are driven with 7x7 mm. square spindle.
For fittings with a square spindle larger than 7x7 mm. you have to order the Elimatic-sleeve-kit. This allows the square spindle to be adjusted to 8x8, 9x9 or 10x10mm.

Standard equipped with a built-in sequence control:
When the window opens automatically, the ZV-ELIMATIC will first unlock the hardware fittings (takes max. 13 sec.). After this, the connected drive(s) will open the sash.
When the window is closing, a signal is automatically sent from the window drive(s) to the ZV-ELIMATIC as soon as the sash is closed. At this moment the ZV-ELIMATIC will lock the mechanical locking point again.
One or more electromechanical drives can be connected to the sequence control (max. 6A) for opening and closing the window.