Search

This Tilt-Bracketset is used for sash-installation of the EKA20/SKA20 chain actuators on bottom-hung and side-hung open-in windows. This bracketset is essential on small windows to prevent (too much) bending of the chain. The bracketset consists of 2 motor brackets (aluminium), 2 actuator faste..

Bracketset RM is used for mounting the type EKA30/SKA30 chain actuators on bottom-hung and side-hung open-in windows (frame installation) as well as top-hung open-out windows (sash installation) with an overrebate step of up to 18mm..The bracketset consists of 2 motor brackets (metal, painted), ..

Bracketset RM-S is used by frame-installation of the EKA20/SKA20 chain actuators on small bottom-hung and side-hung open-in windows. You  need this set to connect the chain to the sash and to swivel-mount the actuator to the frame.Attention: When using this bracketset on a window with an overre..

This bracketset is used for concealed installation of EKA20/SKA20 chain actuators in wooden window frames.  Attention: The possibility of concealed installation depends on the sash and frame section! Please contact us if in doubt about the applicability. ...

This bracketset is used for concealed installation of EKA20/SKA20 chain actuators in aluminium window frames.  Attention: The possibility of concealed installation depends on the sash and frame section! Please contact us if in doubt about the applicability. ...

This bracketset is used for concealed installation of EKA20/SKA20 chain actuators in PVC window frames.  Attention: The possibility of concealed installation depends on the sash and frame section! Please contact us if in doubt about the applicability. ...

Bracketset KF 0/15 is used for mounting the type EKA30/SKA30 chain actuators on bottom-hung and side-hung open-in windows (sash installation) as well as top-hung open-out windows (frame installation) with an overrebate step of 0-7 mm or 15-25 mm including sash bracket and washer component.The br..

Bracketset KF7 is used for mounting the type EKA30/SKA30 chain actuators on bottom-hung and side-hung open-in windows (sash installation) as well as top-hung open-out windows (frame installation) with an overrebate step of 7-15 mm including sash bracket and washer component.The bracketset consis..

Bracketset DF is used for mounting the type EKA30/SKA30 chain actuators on rooflights.The bracketset consists of 2 motor brackets (metal, painted), 2 actuator fastening screws (stainless steel), sash bracket and washers for the sash bracket.There is a wide variety of mounting brackets availa..

Bracketset SK is used for mounting the type EKA30/SKA30 chain actuators on top-hung casement windows.The bracketset consists of 2 motor brackets (metal, painted), 2 actuator fastening screws (stainless steel), sash bracket and washers for the sash bracket.There is a wide variety of mounting ..