LINEAR ACTUATOR EA-L-100-180

Heavy lift 24 Volt DC linear actuator with a stroke of 1000mm. and a push / pull force of max.1800N. with Tandem function.
Widely applicable on heavy windows, skylights and roof windows for daily ventilation or SHEV systems. (acc. EN 12101/2).

The tandem function allows to connect up to 4 actuators in parallel.
If one actuator is stopped due to overload, the other connected actuators will stop automatically to prevent damage.

Standard equipped with:

• “F” contact for sequence controlling
• Operation of the electric actuator for the OPEN and CLOSE driving directions.
• Tandem function enables the coupling of further actuators. (max. 4)
• Current-controlled cut-off.
• Multiple triggering lock function in the end positions and in case of overload.
• Soft start of the electric actuator.
• Undervoltage protection of the actuator.
• Cycle counter for actuations and cut-offs.
• Speed detection.
• Stroke programming function.
• “F” contact for sequence controlling
• Maximum rated current can be set in ‘OPEN/CLOSE’ driving directions by rotary switch.
• Possibility to connect parameterising interface.

Optional: Possibility to connect end switch.

Aluminum housing, anodized EV1

Comment:
Supplied without mounting brackets. These must be ordered separately.
Because of the high forces, you have to use the strengthened brackets. (See "related products")