CHAIN ACTUATOR VEGA

Chain actuator VEGA is available in both a 24V DC and a 230V AC version. This version has a fixed, non-adjustable stroke of 300mm. and a maximum push/pull force of 300N. Applicable to windows and vents for natural ventilation. The 24 Volt DC version complies with EN12101-2 and is therefore also suitable for use in natural smoke and heat extraction (N-RWA) systems.

The QUASAR has a die-cast aluminum housing (450x45x32mm.) which is available in gray, white or black version.
An advantage of this chain actuator is that the output of the chain is located in the center of the housing. This allows the motor to be mounted exactly in the middle of the sash.

This chain actuator is standard equipped with an automatic 0-point detection in closed position. This eliminates the need for mechanical adjustment.
The start position, end position and overload protection are electronically controlled.

• RF version (only 230V AC versions) - With built-in remote control receiver
• RF-Rain version (only 230V AC versions) - With built-in remote control receiver and connection for rainsensor.
  
• SYNCHRO version (only 24V DC versions) - For use of several motors (max. 4 units) on 1 wing.
• F-Contact (only 24V DC versions an min. orders from 20 pcs.) - For feedback signal in both open and closed position, for example to control an extra bolt or hardware drive.
  

ATTENTION:
The standard version is supplied including a fixed connection cable of 1.5 mtr. (number of wires depends on version)
The mounting brackets must be ordered separately. (Model depends on the situation / profile and application)